Industrial Fiberglass Filtration Media
High-permeability fiberglass filter bags engineered to reduce system resistance, release dust cake cleanly, and increase baghouse airflow in steel, cement, chemical, boiler, ceramic, and building-material applications.
Technical Parameters
Full Model Range
Typical standard configurations shown below. Engineered to be fully compatible with system designs using ASCO™ and Goyen™ pulse jet valves.
| Model | Material | Weight (g/m²) | Diameter × Length (mm) | Max Continuous Temp |
|---|---|---|---|---|
| XC-FG-130x2450 | Fiberglass Woven, PTFE-Finished | 600–850 | Ø130 × 2450 | 260 °C (peak 280 °C) |
| XC-FG-130x3050 | Fiberglass Woven, PTFE-Finished | 600–850 | Ø130 × 3050 | 260 °C (peak 280 °C) |
| XC-FG-152x3000 | Fiberglass Woven, PTFE-Finished | 600–850 | Ø152 × 3000 | 260 °C (peak 280 °C) |
| XC-FG-160x4000 | Fiberglass Woven, PTFE-Finished | 600–850 | Ø160 × 4000 | 260 °C (peak 280 °C) |
| XC-FG-160x6000 | Fiberglass Woven, PTFE-Finished | 600–850 | Ø160 × 6000 | 260 °C (peak 280 °C) |
Any size, any spec — 100% customized to your system.Request custom sizes → | ||||
Product Standards
Knowledge Base
Pre-coat (perlite or crushed limestone) is blown into the duct ahead of the baghouse to coat the filters and stop sticky fumes bonding to the fibers. With sticky dusts, pulse energy alone can't do the job — especially if the air isn't dry — so a continuous pre-coat protects the bags.
